ZG-MFFlying Laser Marking Machine
The Flying Laser Marking Printing Machine is a laser marking printer designed specifically for automatic manufacturing lines for flying printing and marking of date codes and barcodes.
In comparison to typical inkjet printers, the Flying Laser marking printer consumes no resources, requires no ink, produces no pollution, produces no noise, is energy efficient, and is environmentally friendly.
LASER SYSTEM OPTIONS
Laser Power
The ZG-MF is available with 20W ~100W of output power.
For high-speed marking, 100W to 200W fiber lasers are available as part of the ZG-MF Series.
Lens Configuration
Our standard lens provides the best optical configuration for most part marking requirements. The marking field is large, and the marking distance is long enough to reduce dust accumulation on the lens.
Our advanced lens is used to obtain a laser engraver. This configuration helps the laser create deep engravings into the material to create more durable markings. It can also be used or to texture surfaces.
Barcode Validation
If you have part traceability needs, our barcode validation system and camera validate marking quality as soon as 2D codes are marked. The camera is delivered preconfigured and only needs to be connected to the controller’s back panel.
Protective Cover
Installed on the machine basement to protect the human body from laser emission and dust accumulation. This guarantees consistent high-quality results and operators’ safety.
For our complete list of features and options, contact a Chutian Laser expert.
TECHNICAL SPECIFICATIONS
The ZG-MF series offers configurations that are ideal to mark small codes, or when marking time isn’t an issue.
| CATEGORY | SPECIFICATIONS |
|---|---|
| Nominal Laser Output Power | 20W~200W |
| Nominal Pulse Repetition Rate | 10 kHz, 20kHz |
| Power Consumption | 240W, 250W |
| Laser Type | Solid-state ytterbium-doped fiber |
| Supply Voltage | 24 VDC |
| Pulse Energy | Up to 1 mJ |
| Pulse Width | 100 ns for 3 m fiber cable, 125 ns for 5 m fiber cable |
| Wavelength | 1064 nm |
| Beam Quality | <2 |
| Laser Safety Class | Class 4，Class 1 |
| Cooling | Air Cooling |
| Fiber Cable Length | 3m, 5m |
| Fiber Cable Minimum Bending Radius | Static: 80 mm Dynamic: 150 mm |
| Laser Source MTBF | 100,000 hours |
| Barcode validation (optional) | Cognex or others |
| HMI Software | Web based, Allen-Bradley, Siemens |
| I/O | Terminal Block I/O, Encoder Signal |
| Communications | Ethernet/IP, RS - 232, USB |
| Weight | EM-Smart: 10 kg / Desktop type: 30 kg / Standard type: 120 kg |
| Environmental Conditions 1 | Temperature: 10 °C to 35 °C, Humidity: 10% to 90% (without condensation) |
| Approvals | CE,FDA |
LENS SPECIFICATIONS
| FOCAL LENGTH | 160MM | 254MM |
|---|---|---|
| Max Scanning Speed | 8 m/s | 8 m/s |
| Nominal Spot Size | 30 µm | 50 µm |
| Nominal Marking Field Size | 110 x 110 mm | 175 x 175 mm |
| Depth of Focus | 1 mm | 2 mm |
APPLICATIONS
The ZG-MF is a fiber laser marking systems that creates permanent marks on all types of metals, rubber and plastics. It can be used for all types of identifiers, such as serial numbers, data matrix codes, QR codes and logos.
60w Fiber Laser Punching
Laser marking machine is very advantageous in the processing of thinner material micro-hole, laser punching speed, high efficiency, good economic efficiency, wide application areas, can be in the textile fabrics, leather products, paper products, metal products, plastic products on the processing operation of punching holes.
Color Laser Marking
Under the action of high quality laser beam, the laser thermal effect is produced on the surface of stainless steel, making the laser energy proportional to the density of the film, with the increment of laser energy, the color sequence of the stainless steel surface will change, through the laser energy adjustment can achieve color marking.
White Plastic Laser Marking to Black
Laser marking technology has a wide range of applications in the electronic 3C industry, such as cell phone cases, headphone cases, charging heads, rechargeable batteries, etc. The depth of the marking color is determined by the power and the amount of defocusing. It is common to have white marking on black plastic, or black marking on white plastic. The typed fonts and patterns have no handfeel and clear handwriting.
Marking of Ferrous Metals to Black
Chutian laser marking machine electro-optical conversion rate is high, compact size, good beam quality, the use of pulse width adjustable mode, high can adjust the frequency to 400Khz, you can directly hit the metal black effect. Set the marking parameters can also achieve the material surface white, beige, black and other colors of laser marking.
COMPLETE REMOTE SERVICE WHENEVER YOU NEED IT
Laser technology has never been so accessible. With remote support functionalities embedded in our controller, you can get quick technical support wherever you are. If you activate a remote gateway, our laser experts and engineers can take full control of the laser to better support you.
LXQ SERIES - FIBER LASER MARKING SYSTEMS
The ultra-portable laser marking machine that you can take with you in your automobile. You may take it anywhere and use it to laser-mark your thoughts at any moment.
FIBER LASER MARKING MACHINE
Designed for batch marking, the ZG-MF series is an ergonomic laser marking workstation that allows you to select and pay only for the features you need. Operated manually by default, the workstation can also be automated and motorized.
DESKTOP LASER MARKING MACHINE
Fiber laser that can reach 100,000 hours of service life and easy to maintain. No need to worry about its working condition. Portable operation, compatible with PHOTOSHOP, CORELDRAW, AUTOCAD, and easy to get started.
